iRest Future Foresee A192 - Method of Usage - Advanced Functions; Stopping and Saving Massage Sessions; Calf Installation Procedure; Head Cushion and Backrest Pad Usage

10
·Press power button during massage progress, all massage function will be
stopped immediately, meanwhile you can set up memory function, the backrest
and foot part will reset. Or switch off the chair when massage time finished, you
can press the memory function button to storage the massage situation, the
backrest and foot part will not reset.
·Memory function : Display with “memory” flashing instructions, press the button ,it
start to storage the massage mode doing when stop the chair, the remote screen
show 1.2.3, press one to finished it with bi-bi-bi last 2 seconds. Press on/off
button again to closed the chair ,the chair will be reset. Or waiting 10seconds,
automatically stopped, the chair will be reset.
（1）
（2）
Method of usage Method of usage
POWER INPUT
FUSE: T5AL 250VCONTROLLER JACK ON/ OFF
·Cut off the power of the whole machine.
Figure (Switch power off)
Diagram of the switch position of power supply
Power switch method map
·When the machine under the working state, with lying and calf rest lifting, you
could not apply gravity on the calf, to prevent the massage chair does harm to
peoplebefore dumping(chart1).
·Ensure the mechanism hands not in the seat part ,otherwise will cause
uncomfortable in the Buttock when you seating in the chair(chart2).
Note
（chart1） （chart2）
4.Calf installation
·Use the Allen wrenches lock two hexagon socket head screws. (chart5).
·The install hole of rail shelf (chart 1).
·Place the isolation sleeve on both sides of the calf hook. (Outside) (chart2).
·Place the flat washer into the pin shaft. (chart3).
·Calf hooks install hole and rail shelf install hole should be aligned, insert the pin
with a flat washer(both sides are required to be inserted). The pins are aligned with
the screw holes for easy installation. (chart4).
Chart 1 Chart 2
Chart 3 Chart 4
Chart 5
·Foldable pillow pad. The users can choice the number of layer to find the best
intensity of back massage.
·Separate the head pillow to fall down to the back to reduce the intensity of back
massage.
·Backrest cushion and backrest connected byzipper (1), head cushion and
backrest pad connected by thread gluing (2)
Zipper
Thread gluing
5. Head cushions and backrest pad's dismounting and use manual
Memory
Button
Description
Display
Memory
program
Menory
3.Turn off power, stop massage