Roomba
®
i5+ Owner’s Guide 7
EN
2
3
1
Cleaning the Filter
Remove debris by tapping the filter against
your trash container.
Reinsert filter with ridged grips facing out.
Place bin back in the robot.
Remove the bin. Remove the filter by
grasping both ends and pulling out.
Important: The robot will not run if
the filter is not installed correctly.
Replace the filter every two months.
1
1
2
2
3
3
Cleaning the Full Bin Sensors
Washing the Bin
Remove and empty the bin.
Release the bin, remove the filter, and open
the bin door.
Wipe the inner sensors with a clean, dry
cloth.
Rinse the bin using warm water.
Wipe the bin door with a clean, dry cloth.
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Closed Door
Important: Do not wash the filter. Remove
the filter before washing the bin.
Open Door
Note: Bin is not dishwasher safe.
To Next Page
Loading...
