31Roomba Combo® 10 Max + AutoWash dock Owner’s Guide
EN
3
Unplug the dock from the wall. Remove both tanks.
Place the dock on its side, remove the Debris Tube Access Panel, and inspect
the tube for debris. If necessary, clear any debris from the tube
Replace the access panel, and repeat step 1. Contact Customer Care if the
error is not resolved.
This product has been equipped with a thermal protector designed to protect
against damage due to overheating. If the protector operates, the motor will
stop running. If this happens, unplug the unit, allow to cool for 30 minutes, clear
any obstructions from the evacuation port and evacuation tube, and plug the
unit back in.
To Next Page
Loading...
