Iron Aces Road Glide Mount User Manual

Road Glide iPhone/GPS Mount
Version 2.0Install Guide
704-255-1780
www.ironacesspeedshop.com
Tools Required:
• Allen wrench – 7/64”
• Blue Loctite
• Drill
• Drill bit (2) – 3/32”; 5/32”
• Flathead screwdriver (small head)
• Phillips head screwdriver
• Torque wrench (optional)
• Torx bit – T-25
IMPORTANT!!
Iron Aces Speed Shop is not responsible for the
operation of the Road Glide iPhone/GPS Mount or
its compliance with highway regulatory and safety
standards. Please use common sense and do not
operate either device while riding your motorcycle.
Doing so is at your own risk.
Zumo 5xx
Hardware
Drill Guide
Cut out this drill guide to
be used on Step 5.
Zumo 6xx
Hardware
Mounting Screws
Universal
Standoffs
See Appendix for Explanation of Parts
Standard Mount
Backing Plate
Zumo 350LM
Hardware

Iron Aces Road Glide Mount Specifications

General

Brand	Iron Aces
Model	Road Glide Mount
Category	Motorcycle Accessories
Language	English

Summary

Motorcycle Mount Installation

Bezel Removal and Drilling

Detailed steps for removing the instrument bezel and drilling mounting holes.

Mount Attachment and Bezel Reassembly

Instructions for attaching the mount to the bezel and reassembling the motorcycle dashboard.

Device Mounting

Final steps to attach the phone or GPS cradle and mount your device.

Appendix and Hardware

Hardware Component Explanations

Explains the purpose and use of various hardware components included in the kit.

X-Grip Installation

Guide for installing the X-Grip cradle and its rotation features.