1. Ready in just 3 steps !
First ensure that the battery is activated (see chapter 5)
1) Press the ‘MODE’ key until ‘STEP’ appears in the display
2) Press and hold the ‘RESET’ key until the display is set to zero.
(hold the key for at least 4 seconds)
3) If possible, position the PE-DRO upright on your body at hip height.
-> and off you go
From the display, you can now see the number of steps.
For more information on the device, please read through the instructions for use in their entirety.
To Next Page
Loading...
Need help?
General
