To Next PageTo Next Page
Need help?Do you have a question about the Irriland Silver Series and is the answer not in the manual?
General| Brand | Irriland |
|---|---|
| Model | Silver Series |
| Category | Farm Equipment |
| Language | English |
Critical safety advice for machine use, hose disconnection, and sprinkler operation.
Precautions for machine movement and maintenance safety.
Meanings of symbols indicating general risks and safety.
Symbols for moving parts, lifting points, and lubrication.
Guidance on following machine-mounted instructions.
Specifies conditions for using the machine with water and solids.
Details of the machine's identification plate and parameter meanings.
Identification of key machine controls and their functions.
Identification of primary levers, gears, and indicators.
Details on gearbox engagement, brake adjustment, and speed settings.
Components for automatic disengagement, lifting, and safety dogs.
Pressure gauge, water inlet, and bypass lever functions.
Anchoring jacks, hose couplings, and fixing pins.
Speed compensator, wheel axles, and towing bar components.
Ballast mounting, cart adjustments, and safety chain.
Identification of the controller unit and solar panel.
Details on speed reading rollers, sensors, and bypass valves.
Description of the vacuum or discharge valve.
Details on the electric shut-off valve for specific controllers.
Detailed dimensions and weight specifications for machine models.
Guidelines for freight, loading, unloading, and part dismantling.
Instructions for safe machine lifting using indicated points.
Instructions for mounting axles and adjusting tire width.
Procedures for mounting front legs, towing bar, and front jack.
Steps for mounting the automatic loading system and its components.
Instructions for mounting rear anchoring legs and securing jacks.
Steps for assembling the sprinkler cart and checking pipe positions.
Details on mounting tire axles and adjusting leg height.
Instructions for cart safety chain and mounting the sprinkler.
Placement of the hand wheel on the PTO shaft.
Adjusting the safety dog and preparing for hose rewinding.
Connecting the hose coupling and tightening the bolt.
Procedures for hooking and lifting the sprinkler cart.
Essential checks including gearbox oil, lubrication, and tire pressure.
Procedures for hooking the machine to the tractor and setting stabilizers.
Steps to lift the chassis and adjust legs for horizontal alignment.
Aligning the drum and setting the rotation stop.
Lowering and fixing anchoring legs, and adjusting the safety dog.
Procedure for dropping the sprinkler cart using the hand wheel.
Removing the PTO hand wheel from its working position.
Pulling out the hose, checking irrigation sector, and disconnecting tractor.
Placing the safety dog in its working position.
Connecting the main line and adjusting irrigation speed and pressure.
Engaging the gearbox and setting speed based on pressure.
Steps to automatically stop the machine after rewinding.
Checking and adjusting the hose guide fork alignment.
Verifying and adjusting the guide fork position for hose alignment.
Checking the function of the engagement/disengagement lever.
Ensuring proper alignment of the gearbox pinion and crown gear.
Methods to adjust pull-in speed using the by-pass lever.
Using the PTO for emergency hose rewinding with safety precautions.
Importance of adequate lighting for night operation.
Recommended lubrication intervals and gearbox oil changes.
Periodic checks for tire pressure and sprinkler lubrication.
Steps for storing the machine at the end of the irrigation season.
Troubleshooting problems with the polyethylene hose rewinding.
Solutions for machine instability and unexpected movement.
Correcting issues with polyethylene hose roll-up alignment.
Key suggestions for transport speed and gearbox safety.
Guidance on initial hose pull-out and speed control.
Precautions for changing speed gears safely.
Risks associated with drum rotation and hose trapping.
Hazards related to machine overturn and upper frame rotation.
Critical warning about electrical shock risk from power lines.
Risks from sprinkler throw impact and hose coupling.
Risks related to hydraulic circuits and road incidents.
Steps to reduce pressure before disconnecting and shifting.
