Irritrol LIFE-B-4 - Setting Station Run Time Duration

10
Setting Station Run Time Duration
The station run time duration is the amount of time a station will operate once it has
been started.
A station is assigned to a program when it is given a designated run time duration
ranging from 1 minute to 8 hours. Each station can have a dierent run time duration
in each program.
1. Turn the control dial to the Run Time position
.
2. Press P+ or P- buttons to select the desired program A or B. The selected station
Run Time number and the program letter A or B will be displayed.
3. Press either the
or button to select the desired Run Time number from 1 to
the maximum number of stations of the LIFE Controller model: 4, 6 or 8.
4. Press either the
or button to set the run time.
• To remove the station from the program, decrease the run time duration to less
than 1 minute to display OFF.
Irritrol LIFE Controller 4
_
6
_
8
5. Repeat steps 3 and 4 for each Run Time number, if desired.
6. Repeat steps 2–5 for each program as needed.
7. Press the Auto
button when finished.
PROGRAMMING