Irritrol LIFE-B-4 - Manual Station Operation

12
Irritrol LIFE Controller 4
_
6
_
8
CONTROL OPERATIONS
Manual Station Operation
Manual controller operations will override all currently active automatic operation
and sensor input. Any automatic program start time that occurs during a manual
operation will be cancelled.
Manual operation enables any stations to be given a temporary station run time
duration.Manual operation stops any running watering cycle.
1. Press the Manual Station
button.
The selected station number and a Manual run time will be displayed.
Press either the
or button to select the desired station number. Station
numbers go from 1 to the maximum number of stations of the LIFE Controller
model: 4, 6 or 8.
2. To manually start a station that is currently OFF (the symbol
is o to indicate
the station is OFF), press either the
or button to set the run time from 1
minute (0:01) to 8 hours (8:00) and press the Start/Stop
button. The symbol
is turned on to indicate the station is ON.Note: if the maximum number of
stations that can be turned ON has been reached, pressing the Start/Stop
button. The symbol
is turned on to indicate the station is ON.
Note: The temporary station run time will not aect the station’s run time within
any automatic program.
3. To manually stop a station that is currently ON (the symbol
is on to indicate
the station is ON), press the Start/Stop
button to stop the selected station.
The symbol
is turned o to indicate the station is OFF.
4. Repeat steps 2–4 for additional stations.
5. Press the Auto
button when finished.