6
Irritrol LIFE Controller 4
_
6
_
8
10. Settings Button - To set Controller’s parameters.
11. Test Button
- To run a program to check hydraulic and electric station
operation.
12. Manual Program(s) Button
- To select watering programs for manual
operation.
13. Manual Station(s) Button
- To select station(s) for manual operation.
14. Pause Button
- Turn o and prevents automatic station operation.
15. Start/Stop Button
- To start or stop manual program(s) and station(s) and
test program(s).
16.
and Button - Press to increase or decrease display number values and
various functions.
17.
and Button - Press to select next or previous function parameter.
18. Reset Button - Momentarily insert a clip to press the hidden Reset button to
restart operations.
19. LCD Display
20.
Symbol - Displayed when the Time duration shown is in minutes and
seconds.
21.
Symbol – Displayed when 24VAC is missing or the Control Module is
removed from the Back Module.
22.
Symbol - Diplayed when automatic irrigation is on Pause.*
23.
Symbol - Displayed when sensor is active.*
24.
Symbol - Displayed when a Watering Budget run time duration adjustment
is in use.
25.
Symbol - Displayed when 12H time format is used.
26.
Symbol - Displayed when irrigation currently on.
27.
Symbol - Displayed to identify the number of the selection within a
function.
28.
2-digit - number representing the shown selection.
29.
Symbol - Displayed when an irrigation program is selected.
30.
1-Character – identifies the irrigation Program selected or M for Master Valve.
PROGRAMMING MODULE
* When both displayed, Rain Sensor is active
To Next Page
Loading...
