B. Controllers with no
sensor inputs and no pump start or master valve:
Refer to Figure 7. Disconnect the valve common wire from the controller’s com-
mon terminal (generally marked “C”, “COM”, or “VC”). Join this wire to the White
wire using a wire connector. Attach the Brown wire to the valve common terminal.
Note: The Yellow wire is not used in this application.
C. Controllers with
pump start or master valve and no sensor inputs:
Refer to Figure 8. Disconnect all common control wires from the controller’s com-
mon terminal (generally marked “C”, “COM”, or “VC”). Join these wires to the White
wire using a wire connector. Be sure to include the common wire from the Pump
Start Relay or Master Valve in this connection. Attach the Brown wire to the com-
mon terminal.
Note: The Yellow wire is not used in this application.
5
Figure 7
Red
Common From Valves
To Valves
White
Yellow (Not Used)
Wire Connector
Irrigation System Controller
Brown
Red
Figure 8
Red
Common From Valves
To Valves
White
Yellow (Not Used)
Wire Connector
Pump Start
Relay or
Master Valve
Irrigation System Controller
Brown
Red
Wireless RS 373-0312 redo 1/27/04 8:55 AM Page 5
To Next Page
Loading...