Doc. CEI12166 Rev. 1 Pag. 11 Of 47
The left side of the screen follows the selection.
NOTE: this selection is independent from other selections, and all selected channels are saved into test
results. On the same result, you can temporarily select to view on trace only, so that it can be examined
at ease.
2.3.5 Menu
With this selection, the following window is opened.
2.3.5.1 Test diagram
This is the selection that allows you to come back to the test control: the test diagram is displayed, it is
possible to start the test and to watch test result. The following is the example of a test diagram.
To Next Page
Loading...
