Doc. CEI12166 Rev. 1 Pag. 15 Of 47
2.3.5.3 Test options
The selection defines the type of test: pressing it, the following window is displayed.
NOTE: the selected option is displayed by LED’s by the side of the SEL pushbutton .
If the operator acts on SEL, opening this window the performed selection is repeated.
This selection is useful in case of:
. Definition of Open commands if the of four coil drive option is available;
. Definition of the test sequence.
- With the “Open” selection, CBA1000 issues an Open command and records timings, according to
other selections. In case of four coils, the selected Open coil phase is driven: selections are performed
in the following window.
To Next Page
Loading...
