Need help?Do you have a question about the ISKRAEMECO MT880 and is the answer not in the manual?
General| Brand | ISKRAEMECO |
|---|---|
| Model | MT880 |
| Category | Measuring Instruments |
| Language | English |
Outlines the duties of the meter owner and personnel for safe operation and handling.
General guidelines and warnings to prevent hazards during handling, installation, and operation of the meter.
Detailed steps and critical safety precautions for installing the MT880 meter correctly.
Information on cleaning, upkeep, and handling potential issues during the meter's lifecycle.
Specifies the physical dimensions and mounting requirements of the MT880 meter.
Details the information and symbols found on the meter's identification plate.
Explains the coding system used to specify meter hardware features and configurations.
Describes the naming convention for different communication modules and interfaces.
Illustrates various wiring configurations for connecting the MT880 meter to the network.
Covers the voltage ranges and current ratings supported by the meter for connection.
Information on connecting an external power source for specific meter versions.
Details the layout and function of terminals in the modular meter version.
Specifies the purpose of each terminal connection point on the meter.
Describes the specific terminals for current and voltage connections, including their specifications.
Explains the meter's input/output capabilities and the 5A relay functionality.
Details the terminals used for RS232 or RS485 communication interfaces.
Provides instructions on how to install and remove the communication module.
Step-by-step guide for handling the SIM card within the communication module.
Information on selecting and connecting the appropriate antenna for communication modules.
Describes the terminal layout for the integrated meter version with RS485 interface.
Details the terminal block specifically for the direct connected D2 meter type.
Explains the optional COP5 cover for protecting meter terminals.
Describes the label placement and the function of the manual billing reset button.
Displays OBIS codes and data values on the meter's LCD screen.
Shows the direction of energy flow for all phases and individual phases on the LCD.
Indicates the presence of voltage and current flow for each phase on the LCD.
Displays status indicators for modem, load control, battery, alarms, and GSM signal on the LCD.
Shows the unit of measurement for the currently displayed data on the LCD.
Indicates active labels and states related to tariffs, signals, and meter modes on the LCD.
Instructions for physically mounting the meter using screws and its hanger.
Guidelines for stripping and preparing various types of cables for meter connections.
Step-by-step guide for connecting all cables and performing final checks.
Classification of errors based on severity and potential impact on meter operation.
Details fatal, critical, and non-critical errors and their required corrective actions.
Comprehensive list of specific error codes, their causes, and recommended solutions.
To Next Page
