11
Attaching Island Runner to Bounce N Splash
Attachments Available cont.
1. Find a any corner of the Bounce N Splash to add the Island Runner. The
Island Runner is a float alone product and does not require you to attach it
to the bouncer. You can simply tie it o to a D-ring or handle and let it float.
2. Take strap in Island Runner box and run it through the d-rings on
Island Runner end. Then run it up over the tube and through hole in
Bounce N Splash mat and completely around the water bouncer tube.
3. Buckle down and tie o excess strap.
To order any of these items call (800) 893-9677, log on to our
website:www.watertrampolines.com,oruseyoursmartphone'scamera,
andTAPopenthebrowserlinkthatappears.
To Next Page
Loading...