TECHNICAL INFORMATION
The connection can be established in two ways:
Client Mode (Standard):
The ismartgate is integrated into the home network vi a Wi-Fi . The end device must have
a data connection with adequate bandwidth. This allows you to access and operate the
user interface via the app or a browser from any location where the data connection is
available.
Access Point Mode (Stand-alone):
The ismartgate functions as a Wi-Fi access point if no home network is available. A router
is not required. The device can not switch automatically to the access point mode from
Client Mode.
Access to user interface is only possible within the Wi-Fi radius. Remote Control is not
possi ble.
8
To Next Page
Loading...