Need help?Do you have a question about the ISOIL ISOMAG ML 51 and is the answer not in the manual?
General| Brand | ISOIL |
|---|---|
| Model | ISOMAG ML 51 |
| Category | Media Converter |
| Language | English |
Explains various symbols used throughout the manual for safety and understanding.
Details electrical specifications including power supply, voltage, frequency, and current.
Outlines operating conditions such as altitude, humidity, and temperature ranges.
Specifies the ambient temperature range for the converter's operation.
Explains the necessity of grounding for correct operation and safety.
Details the isolation specifications for input and output signals up to 500V.
Provides information and precautions for connecting the power supply, including polarity.
Illustrates the internal components and connections of the converter.
Shows the layout and labeling of the converter's terminal blocks for wiring.
Describes the opto-isolated ON/OFF output and its electrical specifications.
Explains the 4-20mA output function and provides load tables.
Lists essential checks before instrument start-up, including power and connections.
Outlines regular checks for instrument integrity, cables, and mechanical fixing.
Shows flow rate, totalizer values, and fluid speed on the display.
Explains alternate page switching and alarm display access.
Explains the meaning of flags and the interpretation of LED status indicators.
Details access codes for function activation and factory default settings.
Explains the functions of short and long presses for the converter's keyboard.
Describes programming methods for blind converters using serial devices.
Covers parameters for sensor insertion, calibration, and detection.
Details setting full scale values, units of measure, and pulse parameters.
Configures time constant, acceleration threshold, and peak cutoff.
Defines alarm thresholds, hysteresis, and output behavior on failure.
Configures input totalizers and output signal behavior (ON/OFF, 4-20mA).
Sets communication protocol, display language, and currency options.
Covers calibration, autotest, simulation, and internal data access.
Describes accessing principal functions directly via the quick start menu.
Explains accessing all functions via the main menu using access codes.
Demonstrates changing the full scale value via the quick start menu.
Detailed explanations for sensor configuration and calibration functions.
Detailed explanations for setting scales, units, and pulse parameters.
Details functions for time constant, acceleration threshold, and response diagrams.
Explains the parameter for anomalous signal pick cut-off.
Sets the output value for alarm conditions like empty pipe or ADC error.
Enables totalizer resets and external autozero calibration commands.
Lists functions that can be assigned to the digital ON/OFF output.
Explains setting the function and range for the 4-20mA current output.
Covers totalizer resets, conversion factors, and monetary tokens.
Explains meter calibration, autotest, and flow rate simulation.
Lists alarm messages, their causes, and recommended actions for resolution.
Details anomaly codes, their descriptions, and the actions to take.
To Next Page
