ISOUND AUDIO VAULT User Manual

Slide power switch to 'MUSIC'. Blue LED indicates power. Connect audio source.

Close Audio Vault and control iPod via transparent window without removal.

Adjust MP3 player controls before inserting into Audio Vault.

Slide power switch to 'OFF'. Blue LED will turn off.

Configure alarm settings on your iPod as per its instructions.

Set the Audio Vault power switch to 'ALARM' to enable sleep mode.

Audio Vault plays the last selected song when the iPod alarm triggers.

Ensure iPod is powered on; it will enter sleep mode to save battery.

Adjust iPod volume to a suitable level before the alarm sounds.