6F-18 ENGINE EXHAUST
Installation
1. Install the mounting rubber (2).
2. Install the exhaust pipe (3) and tighten two bolts and nuts on
exhaust silencer to specified torque.
Torque:
Nuts: 43 N.m (4.4 kgf.m)
Main Data and Specifications
Exhaust system
Pipe outside diameter ✕ thickness
Front pipe mm(in)
Middle pipe mm(in)
Rear pipe mm(in)
42.7 ✕ 1.5 (1.8✕ 0.059)<Flange>
54.0 ✕ 1.5 (2.0 ✕ 0.059)
50.8 ✕ 1.5 (2.0 ✕ 0.059)
Silencer
Type Circular section-shell construction
of triple skin and end plates,
internal construction of baffles
and perforated tubes.
Inside diameter mm (in)
Length mm (in)
Approximately 180 (7.09)
Approximately 525 (20.67)
Mounting
Number of suspension points
Type
Catalytic converter type
4
Rubber
Three way Catalytic Converter
To Next Page
Loading...
