ENGINE LUBRICATION 6G-7
Inspection and Repair
CAUTION: Make necessary correction or parts
replacement if wear, damage or any other
abnormal conditions are found through
inspection.
Reassembly
To install follows the disassembly steps in the reverse order.
Important
Sealer - Apply silicon into groove in oil pan lugs prior to fitment
of oil pan to block, remove excess sealer after oil pan
is bolted to block.
Torque
Bolts - Tighten bolts to the specified torque.
Torque : 15 N
m (1.5 kgf
m)
Engine oil - Refill engine oil to the oil pan.
(Lit)
Without filter change 4.40
With filter change 4.70
To Next Page
Loading...
