6A-76 ENGINE MECHANICAL (C22NE, 22LE, 20LE)
TECHNICAL DATA
SOHC Gasoline Engine C22NE/22LE/20LE
Engine Oil Viscosity
The following engine oils can be used:
A = single-grade oils
B = multigrade oils
C = easy run oils
depending on the outside temperature.
Engine Oil Quality
It is important that the following API and CCMC classes are
used:
Engines Single and multigrade oils Easy run oils
Petrol API-SF/CC, SF/CD, SG/CC,
SG/CD, CCMC/G4
API-SF/CC, SF/CD, SG/CD
CCMC-G5/PD2
Important!
CD engine oils designed by manufacturers specially for diesel
engines are not suitable for petrol engines, unless a sufficient
performance class for petrol engines (e.g. API-SF/CCMC-G4)
is also indicated.
Disposal.
Observe the relevant national regulations when disposing of
used oil.
Engine Oil Filling Quantities
Initial filling
(litres)
Filling quantity
with filter change*
(litres)
MIN to MAX
(litres)
4.25 4.5 1.00
*Up to mark "MAX" on oil dipstick
Oil Pump
Backlash 0.1 to 0.2mm
Gaps in gears opposite housing 0.03 to 0.1mm
Oil pressure at idle speed Engine at operating
temperature (>70°C oil and
approx. 80°C coolant) 150
kPa/1.5 bar
Oil drain plug M14 × 1.5
To Next Page
Loading...
