Isuzu A-4BG1T - Page 157

AIR COMPRESSOR lo-5
Measure the piston and the piston pin hole clearance.
mm (in)
9
Standard
Limit
Piston Pin and Piston
0.002-0.023 0.0040
Pin Hole Clearance
(0.00008-0.00091) (0.00016)
Measure the piston pin and the connecting rod small-
end clearance.
mm (in)
1 Standard
] Limit
Piston Pin and
Connecting Rod
0.002-0.026
01
Small-end Clearance
(0.00008-0.00 102)
(O.Oi39)
!
Measure the air compressor crank pin and connecting
rod large-end clearance.
mm (in)
1 Standard 1
Limit
I
Crankpin and Connect-
ing Rod Large-end
0.02-0.06
Clearance
(0.0008-0.0024)