Isuzu A-4JA1 - Alternator and Adjusting Plate Installation; Oil Filter Installation

ENGINE ASSEMBLY ( 3 )
104
12 18 14 19 7 6 9 2 1 3
4
10
16 17 13 15 20 21 8 5 11
Reassembly Steps – 3
▲ 1. Intake manifold
▲ 2. Injection pump
▲ 3. Fuel injection pump with clip
4. Fuel leak off pipe
5. Oil pipe (Injection pump to cylinder
body)
6. Fuel filter
7. Fuel pipe (Fuel filter to leak off)
8. Fuel pipe (Fuel filter to feed pump)
9. Fuel pipe (Fuel filter to injection
pump)
10. Rear engine hanger
▲ 11. Starter
▲ 12. Exhaust manifold
13. Cooling water intake pipe
14. Cooling water rubber hose
▲ 15. Alternator and adjusting plate
▲ 16. Oil filter
17. Oil pressure switch
18. Front engine hanger
19. Cooling fan drive pulley
20. Cooling fan drive belt
21. Cooling fan and spacer