a.
(DOLING SYSTEhll
77
Lubricate
with multipurpose type grease
Sealed side outward
Apply liquid
gasket here
OK145
Important Operation
1. Spindle, Bearing, and Spacer
Lubricate the bearing with multipurpose grease.
Use a bench press to install the spindle, the bearing
and the spacer.
2. Snap Ring
Use a pair of snap ring pliers to install the snap ring.
4. Pulley Center
Use a bench press and a bar to install the pulley cen-
ter.
5. Seal Unit, Washer and Seal
1) Apply a thin coat of liquid gasket to the seal unit
outer periphery before installation.
2) Use a bench press and a bar to install the seal
unit into
the
pump body.
To Next Page
Loading...
