ENGINE MECHANICAL 6A–99
10.Install the flywheel to the crankshaft.
Refer to “Flywheel Installation” in this manual.
11.Install the front cover to the cylinder block.
Refer to “Front Cover Installation” in this manual.
12.Install the crankshaft damper pulley.
Refer to “Crank Pulley and Flywheel Installation” in
this manual.
13.Install the oil pan to the cylinder block.
Refer to “Oil Pan Installation” in this manual.
14.Install the cylinder head to the cylinder block.
Refer to “Cylinder Head Installation” in this manual.
15.Install the camshaft to the cylinder head.
Refer to “Camshaft Installation” in this manual.
16.Install the rocker arm assembly to the cylinder head.
Refer to “Rocker Arm Assembly Installation” in this
manual.
17.Adjust the valve clearance.
Refer to “Valve Clearance Adjustment” in this
manual.
18.Install the cylinder head cover to the cylinder head.
Refer to “Cylinder Head Installation” in this manual.
19.Install the water pump to the front cover.
Refer to “Water Pump Installation” in this manual.
20.Install the alternator to the engine.
Refer to “Alternator Installation” in this manual.
21.Adjust the fan belt tension.
Refer to “Fan Belt Tension Adjustment” in this
manual.
22.Install the turbocharger .
Refer to “Turbocharger Installation” in this manual.
23.Install the cooling fan and fan guide.
Refer to “Water Pump Installation” in this manual.
To Next Page
Loading...
