ENGINE MECHANICAL 6A–19
• Tighten the fixing nuts and bolts to the specified
torque:
Torque:
Bolt (1): 73 N·m (7.4 kgm/54 lbft)
Nut (2): 73 N·m (7.4 kgm/54 lbft)
Nut (3), (4) : 40 N·m (4.1 kgm/30 lbft)
3. Install the injection pump.
Refer to “Injection Pump Installation” in this manual.
4. Install the oil feed pipe to the bearing case.
To Next Page
Loading...
