57
Drain plug type
1) Wipe clean around the oil filler cap taking care so that no foreign
particles entry. Remove the filler cap.
2) Remove the drain plug by loosening it, and then drain oil.
3) After oil has been drained completely, replace the packing of the drain
plug with a new one, and then install the plug.
4) Tighten the drain plug.
Torque (drain plug) : 78.4 Nm (8.0 kgm)
CAUTION:
Use a receptacle to receive the drained oil so that the engine
and equipment may not be stained with the drained oil.
Oil filler cap
IMLE0093
To Next Page
Loading...
