EasyManua.ls Logo

Isuzu C-240PW-28 - Rocker Arm Oil Ports, Location of

Isuzu C-240PW-28
235 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ARMY TM 9-2815-254-24
AIR FORCE TO 3861-94-2
Compressed air used for cleaning can create airborne particles that
may enter the eyes. Pressure will not exceed 30 psig (207 kPa). Eye
protection required.
e.
Check that rocker arm oil ports (two) are free of obstructions. refer to FIGURE 3-56. Use compressed air if
necessary to clean oil ports.
FIGURE 3-56. Rocker Arm Oil Ports, Location of
f. Inspect rocker arm valve stem contact surface for step wear and storing. If contact services have light step
wear or scoring, they may be honed with oil stone. If step wear or scoring is severe, rocker arm must be
replaced, refer to FIGURE 3-57.
3-26.4. Assembly.
Compressed air used for cleaning can create airborne particles that
may enter the eyes. Pressure will not exceed 30 psig (207 kPa). Eye
protection required.
3-106

Table of Contents

Related product manuals