6-104
SERVICE AND MAINTENANCE
Installation
1. Slide the wiper blade in the direction
of the arrow until you hear a clicking
sound.
Lock button
2. Confirm that the lock button is seated
inside the hole position.
ADVICE
• Do not lower the wiper arm with its
blade removed; the windshield glass
may be scratched.
• Whenever a wiper blade has been
attached, ensure that it is locked
into place. Failure to observe this
precaution can result in the wiper
blade becoming dislocated when
the windshield wiper switch is turned
on.
5108428_sec06_SERVICE AND MAINTENANCE_P001-140.indd 104 2020/11/05 11:54:19
To Next Page
Loading...
Need help?
General
