4-79
CONTROLS AND INSTRUMENTS
Switching between High Beam and
Low Beam
With the headlights on, move the lever
forward and rearward to switch between
the high beam and low beam.
Moving the lever forward selects high
beam; moving the lever rearward selects
low beam. While the headlights are on high
beam, the high beam indicator light on the
instrument panel remains on.
Combination Light Control Switch
With the starter switch in the "ON" position,
turning the light control switch to the
positions indicated in the table below
causes the relevant lights to illuminate.
ADVICE
Placing the starter switch to a
position other than the "ON" position
while the lights are on causes them
to go out.
•
Light Control Switch
Name
Position
Headlight
OFF
OFF
ON
ON
Clearance light
ON
Taillight
License plate light
Illumination light control
Front end outline marker light
V
Rear fog light
V
OFF OFF
4608498sec04CONTROLSANDINSTR4-794-794608498sec04CONTROLSANDINSTR4-794-79 2015/11/0213:58:562015/11/0213:58:56
To Next Page
