4-86
CONTROLS AND INSTRUMENTS
Use the inter-differential lock when one
or more than one of the tires on the drive
axle is on a muddy or sandy road surface,
frozen and sloped road surface, or other
slippery road surfaces.
Stop the vehicle. Press the switch on
the "ON" side. The inter-differential lock
engages and the inter-differential lock
indicator light comes on. To disengage the
inter-differential lock, press the switch on
the "OFF" side. The inter-differential lock
indicator light goes out.
Inter-Differential Lock Switch
V
Inter-differential lock indicator light
CAUTION
The differential may develop a
problem if the rear wheels are
allowed to spin repeatedly without
using the inter-differential lock.
To engage the inter-differential lock,
stop the vehicle and then press the
inter-differential lock switch on the
"ON" side.
With the inter-differential lock
engaged, the turning radius of the
vehicle increases.
Do not engage the inter-differential
lock unless needed. Otherwise, tire
wear, noise and vibration will result.
•
•
•
•
NOTE
The inter-differential lock directly
connects the forward rear axle with
the rearward rear axle.
•
4608498sec04CONTROLSANDINSTR4-864-864608498sec04CONTROLSANDINSTR4-864-86 2015/11/0213:59:002015/11/0213:59:00
To Next Page
