4-145
CONTROLS AND INSTRUMENTS
If the selected position indication goes out
and the recommended gear display comes
on while driving or a stop, a failure has
occurred in the automatic transmission
mechanism or its control system.
Although limited driving is still possible,
a serious failure having occurred in the
system prevents the selector buttons
from being used. If this happens, stop
the vehicle at a safe place and contact
the nearest Isuzu Dealer. (When the
recommended gear displayed is one from
"1" to "6", driving is possible by using only
the gear displayed until you turn the starter
switch to the "LOCK" position.)
In the Event of Failure
ADVICE
When the automatic transmission
system has failed, any one of "R"
"N" and "1" to "6" is indicated on
the recommended gear display.
When any position other than "N"
is displayed, driving is possible
provided only the gear displayed is
used.
•
Type 1
Type 2
4608498sec04CONTROLSANDINSTR4-1454-1454608498sec04CONTROLSANDINSTR4-1454-145 2015/11/0213:59:582015/11/0213:59:58
To Next Page
