Isuzu FSS - Page 302

4-168
CONTROLS AND INSTRUMENTS
ABS Operation Indications and Signs
Operation Indications of ABS
When the starter switch is placed into the
"ON" position, the ABS warning light comes
on and then goes out in approx. 2 seconds.
The ABS is normal if the warning light goes
out.
Operation Signs of ABS
When ABS is activated, slight vibration
is transmitted to the steering wheel and
operating sound can be heard from the
ABS components.
NOTE
If the ABS warning light does any of the following, the ABS may be faulty.
Please contact the nearest Isuzu Dealer.
The ABS warning light comes on during driving.
The light does not come on when the starter switch is placed into the "ON"
position.
Even if a problem has occurred with the ABS, the regular brakes still work
normally. However, ABS will not operate.
•
-
-
•
ABS Warning Light
V
→ Refer to page 4-40
ABS warning light
4608498sec04CONTROLSANDINSTR4-1684-1684608498sec04CONTROLSANDINSTR4-1684-168 2015/11/0214:00:042015/11/0214:00:04