4-181
CONTROLS AND INSTRUMENTS
Decouple the trailer in the reverse order of
coupling.
1. Set the trailer parking brake and block
the wheels with chocks.
2. Lower the landing gear of the trailer
until it touches the ground.
3. Disconnect the service air line hose,
emergency air line hose and jumper
cable. Attach the disconnected
air hoses to the hangers on the
tractor and the jumper cable to the
receptacle.
4. Push the lock lever forward of the
vehicle while pulling the release wire
to open the jaw.
5. Slowly move the tractor forward to
decouple it from the trailer.
CAUTION
Do not place anything on the
platform. It may come in contact
with the trailer during a turn, and
damage the vehicle or prevent safe
driving.
•
Decoupling of Trailer
4608498sec04CONTROLSANDINSTR4-1814-1814608498sec04CONTROLSANDINSTR4-1814-181 2015/11/0214:00:072015/11/0214:00:07
To Next Page
