4-116
CONTROLS AND INSTRUMENTS
Downshifting from 4th to low
• Fully depress the clutch pedal.
• Move the gearshift lever to the next
lower gear position.
• Engage the gear while releasing the
clutch pedal.
Reversing
• Place the gearshift lever in "N" and
move the range preselection lever
into the low range position.
• Fully depress the clutch pedal.
• Move the gearshift lever passing
the detent to "R" (reverse gear); the
backup lights will come on and a
buzzer will sound.
CAUTION
A range change (from the low to high range or the high to low range)
automatically takes place when the gearshift lever passes through "N".
Do not place the gearshift lever in "N" while driving in order to make a range
change.
Do not make any range change with the gearshift lever in "R" (reverse gear).
•
•
•
NOTE
Do as follows if range change becomes impossible:
If low-to-high range change is impossible, you can still drive the vehicle. Have
the vehicle inspected by the nearest Isuzu Dealer as soon as possible.
If high-to-low range change becomes impossible, you cannot drive the vehicle.
Immediately pull safely off the road out of the way of any traffic and call the
nearest Isuzu Dealer.
•
•
4608498sec04CONTROLSANDINSTR4-1164-1164608498sec04CONTROLSANDINSTR4-1164-116 2015/11/0213:59:512015/11/0213:59:51
To Next Page
