4-132
CONTROLS AND INSTRUMENTS
Brake
1. Fully pull up the parking brake lever,
turn the starter switch to the "LOCK"
or "ACC" position while fully pressing
the brake pedal and make sure that
the gearshift lever is in "N".
2. Turn the starter switch to the "ON"
position.
3. Open the cover of the Smoother
emergency switch, press the switch,
and check that the Smoother warning
light flashes.
4. Start the engine while fully depressing
the brake pedal. Release the parking
brake and then place the gearshift
lever into "D" or "M" for a forward
movement or into "R" for a backward
movement. Make sure that the shift
indicator displays "1" when the
gearshift lever is placed in a forward
movement position and "R" when the
lever is in the backward movement
position.
5. Release the brake pedal and slowly
depress the accelerator pedal to start
the vehicle.
4608498sec04CONTROLSANDINSTR4-1324-1324608498sec04CONTROLSANDINSTR4-1324-132 2015/11/0213:59:552015/11/0213:59:55
To Next Page
