4-136
CONTROLS AND INSTRUMENTS
CAUTION
When starting the engine of an automatic transmission model, sit on the driver
seat, fully pull up the parking brake lever, place the selector lever in "N", and
fully depress the brake pedal before starting the engine.
If you start the engine through the window, the vehicle may start moving if the
selector lever is in any position other than "N". This is very dangerous. Never
start the engine in that way.
•
•
How to Use the Selector Lever
To Start Your Vehicle - on Normal
Roads
1. Fully depress the brake pedal, make
sure the selector lever is placed in
"N" and the parking brake lever is fully
pulled up, and then turn the starter
switch to the "ON" position.
N
Start
Brake
2. Start the engine while fully depressing
the brake pedal with your right foot,
and place the selector lever into "OD"
for forward movement or into "R" for
backward movement.
3. Check safety of the surrounding area
and the position of the selector lever
visually and then release the parking
brake lever.
4. Gradually ease your right foot
pressure off the brake pedal while
slowly depressing the accelerator
pedal to start the vehicle.
4608498sec04CONTROLSANDINSTR4-1364-1364608498sec04CONTROLSANDINSTR4-1364-136 2015/11/0213:59:562015/11/0213:59:56
To Next Page
