Isuzu FVM - Page 284

4-150
CONTROLS AND INSTRUMENTS



How to Use HSA
1. Place the starter switch into the "ON"
position. Make sure the HSA indicator
light in the meter panel then comes
on and stays on for about 3 seconds.
HSA Indicator Light
V
→ Refer to page 4-62
CAUTION
If the HSA indicator light flashes or remains off or the buzzer continues to
sound on a snowy, icy or otherwise slippery road, the HSA system may have a
problem. Deactivate the HSA and have your vehicle inspected at the nearest
Isuzu Dealer as soon as possible.
•
HSA indicator light
2. Start the engine. Release the parking
brake and fully depress the brake
pedal for at least 1 second. If your
vehicle is equipped with a Smoother,
place the gearshift lever into "N" and
fully depress the brake pedal. Confirm
activation of the HSA by checking that
the HSA indicator light in the meter
panel comes on.
When the HSA OFF switch remains in
the "ON" position, the HSA indicator
light does not come on.
HSA OFF Switch → Refer to page 4-148
3. Pull the parking brake. Confirm
deactivation of the HSA by checking
that the HSA indicator light in the
meter panel goes out.
4608498sec04CONTROLSANDINSTR4-1504-1504608498sec04CONTROLSANDINSTR4-1504-150 2015/11/0213:59:592015/11/0213:59:59