4-171
CONTROLS AND INSTRUMENTS
Use this switch when you want to cancel
the ASR. When you press this switch while
the ASR is active after the engine is started,
the ASR is cancelled and the ASR indicator
light (amber) in the instrument panel comes
on. When the switch is pressed again, the
ASR function turns back on.
ASR OFF Switch
ADVICE
When you turn off ASR, it will not be
available to assist you in slippery
driving conditions. Always use
caution when driving on slippery
roads.
Be sure to enable ASR during
normal driving.
•
•
NOTE
If ASR is off when the engine is
turned off, it is automatically re-
enabled when you restart the
engine.
•
ASR indicator light
(Amber)
4608498sec04CONTROLSANDINSTR4-1714-1714608498sec04CONTROLSANDINSTR4-1714-171 2015/11/0214:00:042015/11/0214:00:04
To Next Page
