2-31
IMPORTANT INFORMATION
ES11109/FS8209A Manual Transmission Model
V
The ES11109 or FS8209A manual transmission differs from the 6 speed manual
transmission in that it requires selection of low range or high range when the gearshift
lever is used. Be sure to learn how to correctly use the gearshift lever.
Model with ES11109/FS8209A Model
Manual Transmission
V
→ Refer to page 4-114
On a Smoother model, the driver does not use a clutch pedal when pulling away,
changing gears or stopping; he/she uses only the gearshift lever, accelerator pedal,
and brake pedal. Be sure to learn the characteristics of the Smoother model and how
to correctly operate it. When the vehicle is stationary, remember to keep the brake
pedal firmly pressed and, if necessary, place the gearshift lever in "N" and apply the
parking brake.
Immediately after engine startup, while the air conditioner is running, the engine speed
rises, making creep stronger than it is at other times. When you move the gearshift
lever out of "N", firmly press the brake pedal.
Smoother Model
SA
Model with Smoother
SA
→ Refer to page 4-117
MAP
NOTE
[Creep]
With the engine running and a gear
position other than "N" selected,
power reaches the wheels even
when the accelerator pedal is not
pressed, causing the vehicle to
tend to move. This phenomenon is
called creep. The higher the engine
speed, the stronger the creep and
the greater the vehicle's tendency to
move.
•
4608498sec02IMPORTANTINFORMAT2-312-314608498sec02IMPORTANTINFORMAT2-312-31 2015/11/049:53:452015/11/049:53:45
To Next Page
Loading...
