8-30
IN CASE OF EMERGENCY
When the Wheel Parking Brake Cannot be Released
FAB
CAUTION
When the spring brake is released manually to move the vehicle with a wheel
parking brake, the parking brake will not work. Do not release the spring brake
on a slope.
Do not release the brake manually, other than when the vehicle is being towed
by a tow truck or the vehicle is being moved temporarily.
Contact the nearest Isuzu Dealer immediately after moving the vehicle.
•
•
•
1. Firmly chock the wheels.
3. Remove the cap and insert the
release bolt, a tool carried on the
vehicle, as far as it goes. Rotate it 90°
clockwise and lock.
2. Loosen the nut and then remove the
release bolt.
WARNING
Do not remove any bolts other than
the release bolt. Since a powerful
spring is inside, removing other bolts
may lead to a serious accident.
•
4612812sec08INCASEOFEMERGEN8-308-304612812sec08INCASEOFEMERGEN8-308-30 2016/04/1416:49:082016/04/1416:49:08
To Next Page
Loading...
