ITC Power DG8500SE-3 - User Manual

DE
EN
FR
IT
NL
ES
PT
Benutzerhandbuch
User manual
Manuel d'utilisation
Manuale dell'utente
Handleiding
Manual de usuario
Manual do usuário

Summary

Starting-up the machine

Check and Add Engine Oil

Check the oil level before operation and add engine oil if necessary.

Oil Filling

Check Oil Level and Type

Illustrates the correct oil type (15W-30) and the MIN/MAX oil level marks.

Add Engine Oil

Diagram showing how to add engine oil to the generator.

Fuel Tank Filling

Insert Fuel Nozzle

Illustrates inserting the fuel nozzle into the tank for filling.

Exhaust Air from Fuel Pipe

Disconnect Fuel Line

Bleed Air from Fuel Line

Diagram showing how to bleed air from the fuel pipe.

Operation - KEY START

Set Key Start Switch

Shows the rotary switch set to the 'AUTO' position for key start.

Start Engine with Key

Illustrates starting the engine using the key, with time indicators.

Engine Start Sequence

Diagram showing the engine starting sequence with indicator lights.

Operation - AUTO START

Set AUTO START Switch

Shows the rotary switch set to the 'AUTO' position for automatic start.

Engine Start Sequence (AUTO)

Connect AUTO and ATS

Illustrates connecting the AUTO and ATS cables for automatic start.

Check Oil and Start

Operation - STOP

Engine Shutdown Sequence

Set Stop Switch and Emergency Stop

Shows setting the rotary switch to 'AUTO/OFF' and activating the emergency stop.

Oil Change

Locate Drain Plug and Tools

Drain Used Oil

Illustrates draining the old engine oil into a container.

Refill and Check Oil Level

Shows refilling with 15W-30 oil and checking the level against MIN/MAX marks.

Oil Filter Clean;Replacement

Remove Oil Filter

Clean Oil Filter

Install Cleaned Oil Filter

ITC Power DG8500SE-3 Specifications