Itek i60019 - Page 5

5
www.itekbrand.co
• Do not place the product on or
near sources of electromagnetic
pollution, vibration or where the
ventilation is poor as this may
cause damage to the product
or could interfere with other
products.
• Do not place containers lled
with water or any other liquid on
the top of the product as this
may damage the product.
• When handling electrical items
ensure that your hands are dry.
• Never disconnect the plug by
pulling the power cable as this
may damage the plug and/or
socket.
• If water has entered the body of
the product please switch off at
the wall socket and then consult
a qualied electrician for an
inspection and /or repair.
• Should the product malfunction
due to electrostatic discharge,
switch off at the wall socket and
allow 30 minutes for the charge
to dissipate before reconnecting
the power supply.
• Ensure that there are no metallic
objects placed in the internal
space of the product as this
may damage the product and
cause a risk of electric shock to
the user.
• Warning: Do not cover. Placing
materials such as curtains or
tablecloths over the appliance
can affect the ventilation and
cause the appliance to overheat.
• Ensure there is a minimum of
5cm distance between the
appliance and any walls or
other appliances for sufcient
ventilation.
• In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the service
department.
HIGH VOLTAGE CLASS 1 LASER