Itouchless AV002A - Maintenance and Cleaning; Emptying the Particle Bin; Cleaning the Filter Mesh

- 7 -
INTELLIGENT CLEANER
OPERATING MANUAL
1. Empty the bin
2. Clean the filter mesh
Empty the removable particle bin by following two pro-
cedures below:
Press the clip slightly and put the bin back to the Cleaner.
c. Clear the dirt on the filter mesh.
d. Fit the filter mesh back to the bin.
a. Turn off the power switch.
b. Press down the bin clip and pull out the bin as shown in the following
illustrations below:
c. Clear the bin.
d. Press down the clip on the bin to insert the bin back to the unit.
a. Turn the bin upside down.
b. Press the bottom slightly, take the filter mesh out as shown in the
following illustration: