EasyManua.ls Logo

iTrac AS2000+ - Page 5

iTrac AS2000+
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
by something.
4
Find a suitable place inside the car for installing the unit.
Concealed installation for avoid the thieves damage
Avoid install together with the RF source, such as reversing radar,
alarm and other vehicle communication equipment.
Can use ribbon or wide sponge strength double-faced adhesive
stick to fix.
Equipment with GSM antenna and GPS antenna, installation shall
ensure that face up (skyward), and above no metal barrier shield,
suggest installation position:
Front windshield decorative below the covert,
Front panel (skin for non-metal material) around the shadow
Rear window below decorative
5
Check if all the wiring has been connected correctly; then connect
the GPS Tracker unit to the power supply.
6
We don't provide the SIM card
3.4 Description of AS2000 Plus LED :
LED State Description
Red LED--- indicate charge sate
State Means
Always On Battery Charging/work properly
Off Battery Charging finished or device power off
Blue LED--- indicate the GPS signal state
State Means
Flash fast Searching signal
Always on Working and has located
Off Device sleep or device power off