Need help?Do you have a question about the iTriangle Infotech Pvt Ltd aQuiLa track and is the answer not in the manual?
General| Brand | iTriangle Infotech Pvt Ltd |
|---|---|
| Model | aQuiLa track |
| Category | Computer Hardware |
| Language | English |
Guidelines for safe operation of the OBD II Dongle in automotive environments.
Information regarding the proprietary rights and reproduction limitations of the document.
Details the items included in the OBD II dongle package.
Details GSM/GPRS, GPS, hardware, USB features, storage, and operating conditions of the dongle.
Instructions on how to properly dispose of used or damaged batteries.
Describes the behavior and meaning of the OBD LED status.
Details the behavior and meaning of the GPS LED.
Explains the behavior and meaning of the Process LED.
Covers the behavior and meaning of the GSM LED.
Lists the necessary operating system and software prerequisites for configuration.
Provides steps for installing JDK and configuring the Java environment.
Explains the SMS command format for firmware upgrades.
Describes the GPRS command format for firmware upgrades.
Introduces the Device Configuration Tool (DCT) for device setup.
Categorizes and explains commands for configuration, diagnostics, and control.
Details the options and interface of the DCT landing page.
Explains how to configure IP, Port, Client ID, and APN settings.
Covers configuration of data transmission intervals based on ignition status.
Details parameters for detecting harsh acceleration, braking, and over-speeding.
Configures TOF, Admin numbers, IMEI/Serial selection, and Odometer settings.
Explains how to configure CAN/KWP data parameters (Index, Enable/Disable, Mode, PID).
Describes the process of writing configured settings to the device's flash memory.
Details commands for configuring GPRS, polling intervals, client ID, and GSM settings.
Commands to retrieve current device information and GPS fix status.
Commands to retrieve current configuration information from the device.
Commands for controlling device functions like maintenance server diversion and software reset.
Lists requirements before device installation, including antenna and SIM card.
Step-by-step instructions for connecting the internal battery to the device.
Instructions on how to insert the SIM card into the device.
Guidance on where to install the OBD II port and device in a vehicle.
Provides steps to diagnose and resolve common issues like LED status and connection problems.
Lists recommended actions for proper device connection and handling.
Advises against actions that could damage the device, like exposure to water.
To Next Page