ITRON Gen 5 500W ERT - Page 44

Event ID Event name Event description
3019 Takeover
Package
Accepted
A Takeover Package was presented and accepted by the 500WERTModule.
3020 Takeover
Package Rejected
A Takeover Package was presented, but rejected by the 500WERTModule.
3021 Replay Attack
Detected
Application level security failure - Replay.
3022 RMA Signed
Authorization
Received
A Signed Authorization with issued-to “Itron-RMA” has been received.
10000 PCOMP Changed Metrology parameter (PCOMP) changed.
10001 Count Rate
Changed
Metrology parameter (Count Rate) changed.
10002 Rollover Count
Changed
Metrology parameter (Rollover Count) changed.
10003 Count Sample
Debounce
Changed
Metrology parameter (Count Sample Configuration – debounce parameters) changed.
10004 Encoder Driver
Type Changed
Metrology parameter (Encoder Driver Type) changed.
10005 Prescaler
changed
Metrology parameter (Prescaler) changed.
10006 Initial Index Metrology parameter (Initial Index) changed.
10007 Image transfer
initiated (enabled)
Self-descriptive.
10008 Image transfer
canceled
(disabled)
Self-descriptive.
10009 Image transfer
cancel failed
Self-descriptive.
10010 Image verification
initiated
Self-descriptive.
10011 Image verification
successful
Self-descriptive.
Gen5 500WERTModule Remote Installation Guide B Events and Alarms
December 5, 2022 LDI-0343 REV002 Itron, Inc. Page 44 of 48