10
GoBook Users Manual
77-0100-003 19 January 2001
Calibrating the touch screen
To calibrate the touch screen click the Start menu, select Programs, UPDD or Touch screen, and then select “Cali-
brate”, which opens the touch screen calibration program.
Calibrating the touch screen involves touching and releasing on the X with the stylus on your screen. This action
aligns the background image with the screen.
NOTE If you cannot select objects accurately with the stylus you may need to re-calibrate the touch screen. This
can be accomplished by revisiting the procedure above.
Adjusting the Screen
You can adjust the display brightness for better viewing.
Use the following keys to make adjustments:
To Do This... Press
Lighten the display FN+F7
Darken the display FN+F6
Setting the Date and Time
To set the date and time
1 Click the Start button, select Settings, select Control Panel, and double-click the Date / Time icon.
2 From the Date / Time Properties menu, make changes to the Time and Date, and then close this screen by
clicking OK.
To Next Page
