EasyManua.ls Logo

ITW Foster Control Thaw CT75 - Page 4

ITW Foster Control Thaw CT75
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
Hoover or brush the air lter(where ed)
Troubleshoong
If you have a problem with your unit, Before calling your supplier please make sure that:
a. The plug has not come out of the socket and the mains power supply is on i.e. is the controller illuminated?
b. Check to see if the unit is in standby
c. The fuse for the cabinet is intact
d. The cabinet is posioned correctly – cold or warm air sources are not aecng the performance
e. The condenser is not blocked or dirty
f. The products are placed in the unit correctly
g. Defrost is not in progress or required
If the reason for the malfuncon cannot be idened, disconnect the electrical supply to the unit and contact your
supplier. When requesng a service call, please quote the model and serial number which can be found on the silver
label located on the inside of the unit (starts E......).
3