ORBIMAT CA | Operating instructions Product design
(09.03.15) OW_ORBIMAT_CA_BA_871060202_04_EN orbitalum tools GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0 15
Article Description Version Code Figure
Soft-/Hardware package Suitable for all ORBIMAT orbital welding
power supplies. For external programming
and data documentation, consisting of:
• 1 CompactFlash card 32 MB for transfer-
ring data between the machine and PC.
• 1 USB card reader for exporting the
CompactFlash card on the PC (no further
device required).
• ORBIPROG_CA software allows programs
and protocols to be stored on the PC.
875 050 003
Paper rolls For the integrated ORBIMAT printer.
Suitable for all ORBIMAT orbital welding
power supplies.
Contains 3 paper rolls 875 050 017
Ribbon cartridges For the integrated ORBIMAT printer. For ORBIMAT CA 875 030 004
For ORBIMAT CB 875 030 002
Warning symbols Overview of warning symbols with order
numbers, see chap. 2.
To Next Page
Loading...