ORBIMAT CA | Operating instructions Operation
(09.03.15) OW_ORBIMAT_CA_BA_871060202_04_EN orbitalum tools GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0 55
2. Press button for desired copy direction.
3. Press button for data to be copied (e.g. "A procedure
from a folder").
4. Select and copy element (e.g. procedure).
Fig. 29: Copy functions
8.10.2 Entering comments and application data ("Process details")
Useful information on individual parameters (material, gas type, electrode etc.) and comments (e.g. a description of the
seam preparation, an angle setting of the electrode with adapter) about a procedure can be entered for the operator. This
information may be required for ensuring consistent results while running the procedure.
Entering notes and comments
1. In the main menu, select "System settings" > "Program settings" > "Process details".
A list for entering process-relevant, "non-electrical" parameters appears in the display.
2. Enter notes on the parameters in the corresponding fields and save them.
To enter other information:
3. Press "Comment" button
The comment field appears in the display.
Fig. 30: Process details Fig. 31: Comments
4. Highlight input field, enter text and save.
To Next Page
Loading...